R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Shaft Lock (cont.)
ASSEMBLING
(1) Be sure to use a new Pin cap for replacement and to eliminate all the plastic dust on Shoulder pin 5. (Fig. 10)
(2) Assemble the parts for Shaft lock mechanism as drawn in Fig. 11.
Fig. 10
Plastic dust
Shoulder pin 5
Fig. 11
1. Insert Shoulder pin 5
through the hole of
Gear housing complete.
2. Assemble Pin cap by pressing it
to Shoulder pin 7.
Note: Do not forget to assemble
Compression spring 8.
Shoulder pin 5
P 8/ 10
Pin cap
Compression
spring 8