Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Armature, Spiral bevel gear (small), Ball bearings 6000DDW, 608ZZ (cont.)
DISASSEMBLING
(2) Remove Ball bearing from Gear housing as drawn in Fig. 3.
Fig. 3
1. Remove Retaining ring R-26 with 1R291.
3. Remove Ball bearing 6000DDW together with Armature assembly by tapping the end of Gear housing with
a plastic hammer,
4. Removing M7 Hex nut, small Spiral bevel gear and
Ball bearing 6000DDW from Armature assembly.
Ball bearing 6000DDW
M7 Hex nut
small Spiral bevel gear
2. Reassemble Armature to Gear housing, then small Spiral
M7 Hex nut
1R291
Retaining
ring R-26
bevel gear to Armature shaft. Tighten M7 Hex nut
provisionally by turning it clockwise.
Ball bearing 6000DDW
Armature
6. Remove Ball bearing 608ZZ with 1R269.
Ball bearing 608ZZ
P 4/ 10
Armature
small Spiral
bevel gear
1R269
Advertisement
