Table of Contents
Advertisement
10 Communications
74
1. Select Device Setup.
2. Select Settings.
3. Select mA Loop.
4. Select Inhibit Level.
5. Enter the new value for the current within the allowed range and press Enter.
6. Select Warning Level.
7. Enter the new value for the current within the allowed range and press Enter.
8. Select Over Range Level.
9. Enter the new value for the current within the allowed range and press Enter.
10. Press Back to return to the Settings menu.
Note:
If a value is sent which is outside the allowed range, it will be rejected. Searchzone Sonik will offer the option to restore the previous
value or re-enter another value.
10.3.3 Configure Device Identification Information
Searchzone Sonik can hold information programmed by the user, such as an identification number (tag) or site specific details.
Five text fields are available:
• Description – up to 16 characters
• Assembly Date – mm/dd/yy
• Assembly Number – up to 8 characters
• Short Tag - up to 8 characters
• Long Tag – up to 32 characters
The fields for Description, Assembly Date and Assembly Number are undefined until they have been configured.
Note:
Short Tag and Long Tag are commonly used by HART hosts to identify individual devices (even when a handheld device is connected
directly to Searchzone Sonik). These fields must not be left blank.
1. Select Device Setup.
2. Select Settings.
3. Select HART.
4. Select Configure HART.
5. Select Description.
6. Enter required information up to 16 characters (for example the device type) and press Enter.
7. Select Assembly Date.
8. Enter required information in the format mm/dd/yy (for example the date of installation) and press Enter.
9. Select Assembly Number.
10. Enter required information up to 8 characters (for example a number related to the installation) and press Enter.
11. Select Short Tag.
12. Enter required information up to 8 characters (for example a unique device identification number) and press Enter.
13. Select Long Tag.
14. Enter required information up to 32 characters (for example the device location) and press Enter.
15. Press Send to send the information to Searchzone Sonik.
16. Return to the home screen.
Searchzone Sonik − Technical Manual
PN 2331M1220 Issue 1
11/2018
Advertisement
Table of Contents
