Table of Contents
Advertisement
5 Mechanical Installation
25
5.7 Assemble Cable Glands
Refer to the original manufacturer's assembly instructions for the particular cable gland type. The wiring compartment is certified to be
able to use EX d or Ex e glands to suite local requirements. Leave a service loop in the cable as per site standard procedures.
NOTE
Use certified cable glands and blanking plugs as per local standards.
Figure 14. Example of cable gland
5.8 Connect Cable Glands to the Searchzone Sonik
1. Fit the cable glands to the Detector.
2. Fit a Stopping Plug to any unused cable entry.
3. Tighten the gland nuts and Stopping Plugs as per the manufacturer's instructions.
Figure 15. Connect cable glands to the Detector
Searchzone Sonik − Technical Manual
PN 2331M1220 Issue 1
11/2018
Advertisement
Table of Contents
