Cisco D9800 Getting Started page 8

D9800 Web GUI Environment
D9800 Web GUI Environment
The following is an example of the D9800 web GUI page:
Figure 3: D9800 Web GUI
The following table displays the general buttons on the D9800 web GUI.
Button
Apply
Refresh
Reset Defaults
Clear Counters
Cisco D9800 Network Transport Receiver Version 3.11 Installation and Configuration Guide
8
Description
Saves and applies the settings to the receiver.
Reads existing data from the unit. If edits were made in a setup page, then
unsaved changes are discarded.
Discards any changes made and sets data to default values.
Resets counters on the displayed page.
Getting Started