Buttons - Cisco UC320W Pre-Installation Site Information

Buttons

Shared FXO (Analog) Lines
You can create a shared line to reserve an FXO (analog) line for one user or a group of users. The number of possible shared lines
depends on the total number of enabled FXO ports on the UC320W and SPA8800 gateways. Copy this page if you need to enter
additional shared lines. Note: This feature is not applicable when PBX Mode is selected in System Settings.
Shared Line Label and
FXO (Analog) Line
Enter a name for the shared line.
Identify the FXO line by entering
the short description or the
phone #.
Label:
FXO Line to use:
Label:
FXO Line to use:
Label:
FXO Line to use:
Label:
FXO Line to use:
Voicemail and Email Options
Enable or disable voicemail.
Optionally, specify an email
address for notifications.
Enable voicemail?

Yes No
Email address (optional):
Enable voicemail?

Yes No
Email address for notifications
(optional):
Enable voicemail?

Yes No
Email address for notifications
(optional):
Enable voicemail?

Yes No
Email address for notifications
(optional):
Allow general use Members
for outbound calls?
List the users who will share this line.
(Select No to allow
outbound calls by
Members only.)

Yes No

Yes No

Yes No

Yes No
Pre-Installation Workbook
16