Pcmcia Sub-Matrix Services Description - Honeywell DPR180 Manual

4.2.2 PCMCIA sub-matrix services description

SUB-MATRIX
PCMCIA
Definition:
How to use/execute it:
Notes:
SUB-MATRIX
PCMCIA
Definition:
How to use/execute it:
Note:
26
PARAMETER
INITIALIZATION
Formats and initializes PCMCIA board.
At first, you have to enter the number of records you want for ALARMS files:
"Nb ALARM REC ?" is blinking and you can type it (1651 max).
Then their file name (7 characters max.):
"ALARM NAME ?" is blinking and you can type it .
Then the number of records for EVENTS files:
"Nb EVENT REC ?" is blinking and you can type it (1651 max).
Then its file name (7 characters max.):
"EVENT NAME ?" is blinking and you can type it.
The number of records for DIAGNOSTIC files:
"Nb DIAG REC ?" is blinking and you can type it (2667 max).
Then its file name (7 characters max.):
"DIAG NAME ?" is blinking and you can type it.
And finally, we have to type TRENDS file names (7 characters max.) :
"TREND NAME ?" is blinking and you can type it.
During completion, "PCMCIA INIT" is displayed.
• At each step, you can abort this initialization by pressing
SET UP key.
• Default file names are "ALARM" for ALARM, "EVENT" for EVENT, and "DIAG"
for DIAGNOSTIC and their extensions are automatically added. If another file
name has been entered, then it takes the place of the default one for the
following answers.
• A digital index is automatically added to trend file names on PCMCIA card.
• ALARM, EVENT and DIAG records are organized in blocks and the files use
sectors of 512 bytes (as in the DOS) so that the effective number of records may
be greater than the programmed number of records.
• If the number of records is set to "0", the corresponding file is not created.
PARAMETER
TEST
Tests PCMCIA device.
By pressing ENTER, PCMCIA board driver tests the whole PCMCIA device: during
execution, the percentage of test completion is displayed on the screen:
For example: "15% PASSED"
If an error occurs during this test, "FAILED" appears during 2s. Test is aborted and
PCMCIA status becomes PCMCIA BAD.
At any moment, you can abort the process by using SETUP key.
The test duration is about 1 minute per Megabyte of capacity.
PCMCIA Option Manual
CLASSIFICATION
♦♦♣♣
CLASSIFICATION
♦♦♣♣