Advertisement
Quick Links
Display Module Printed Circuit Assembly (51404459-501)
Document Number
Kit Contents
Summary
Form 43-DR-33-74
Model DR 4300
Circular Chart Recorder
Replacement Instruction
Form: 43-DR-33-74
Effective: 3/98
Supersedes: None
This Display Module Printed Circuit Assembly (PCA) Kit contains the
following parts:
• Display PCA
• #6 x 3/8 Plastite Screws (2)
• Cables (2)
Enclosed are a new display module PCA and parts for your DR4300
recorder. Use the following procedure to install the new display module.
WARNING
Never access components inside the case with power applied.
Continued next page
Page 1 of 3
Advertisement
Related Manuals for Honeywell DR 4300
Summary of Contents for Honeywell DR 4300
- Page 1 Model DR 4300 Circular Chart Recorder Replacement Instruction Display Module Printed Circuit Assembly (51404459-501) Form: 43-DR-33-74 Document Number Effective: 3/98 Supersedes: None This Display Module Printed Circuit Assembly (PCA) Kit contains the Kit Contents following parts: • Display PCA • #6 x 3/8 Plastite Screws (2) •...
- Page 2 Kit Instruction, continued Refer to Figure 1 for the component locations and Table 1 for the Component Location installation procedure. Screws Display Module PCA Cable Pen 1 Cable Pen 2 24229 Figure 1 – Component Location Page 2 of 3 Form 43-DR-33-74...
- Page 3 Kit Instruction, continued Follow the procedure in Table 1 to install the new display module PCA in Installation Procedure your recorder. Table 1 – Display Module Printed Circuit Assembly Installation Step Action Power down the recorder. Open the chart door and swing the chart plate out.