Menu Navigation; Error Reporting - Honeywell Searchpoint Optima Plus Operating Instructions Manual

MAN0905_Issue 7_07/17
11. Use of the HART
1 Device Setup
1 Device Setup
1 Device Setup

11.3.3 Menu Navigation

Menu options can be selected by highlighting the option and pressing Enter, by pressing the number of the
option, or by double clicking on the option. For more information on how to select menu options please see
the instructions for the HART

11.3.4 Error Reporting

Searchpoint Optima Plus implements HART
in the unit while a HART
may pop up during other operations.
1 User
2 User Login
3 Unit Status
4 Gas Configuration
5 Test
6 Calibrate
7 User Configuration
8 Assembly Details
9 Device Info
1 User
2 User Login
3 Unit Status
4 Gas Configuration
5 Test
6 Calibrate
7 User Configuration
8 Assembly Details
9 Device Info
1 User
2 User Login
3 Unit Status
4 Gas Configuration
5 Test
6 Calibrate
7 User Configuration
8 Assembly Details
9 Device Info
host device being used.
®
protocol Command 48, meaning that if any event is detected
®
host is connected, it will be reported immediately. Therefore warning messages
®
Searchpoint Optima Plus with optional HART
Communications
®
Level 1
Level 1
Level 1
51
Operating Instructions
2108M0550
1 HART During Fault xxxx
2 Inhibit Current xxxx
3 Warning Current xxxx
4 Overrange Current xxxx
5 Set Time (24 hour)
6 Set Date (dd/mm/yyyy)
7 Change Password
1 Config Revision xxxx
2 HART Address xxxx
3 Description ??
4 Assembly Date ??
5 Assembly Number ??
6 Device Tag ??
7 Transmitter ID
1 Loop Current Mode xxxx
2 Num req preams xxxx
3 Num resp preams xxxx
4 Dev id xxxx
5 Universal rev xxxx
6 Fld dev rev xxxx
7 Software rev xxxx
8 Hardware rev xxxx
output
®