Table of Contents
Advertisement
SENSEPOINT RFD OPERATING MANUAL
10.6 P-07 Set inhibit current and timeout
1. Select the P-07 set inhibit current and timeout menu.
2. The display shows either:
3. Use the Up and Down buttons on the Handheld Remote Interface to select
the required setting.
4. Press OK to confirm the change.
5. Select the required timeout mode, either:
6. Use the Up and Down buttons on the Handheld Remote Interface to select
the required setting
7. Press OK to confirm the change.
10.7 P-08 Display software version
1. Select the P-08 display software version menu.
2. The transmitter software version number is displayed for 5 seconds.
3. The display then returns to menu 00.
4. Press cancel to return to normal operation or select another menu.
RFDMAN MAN0843 Issue 3
2 (inhibit current set to default 2mA)
4 (inhibit current set to 4mA)
t-on (30 minute timeout enabled)
t-of (Timeout disabled- default)
27
Advertisement
Table of Contents
