Configure Mobile Broadband; Enable Ip Pass-Through Mode - NETGEAR AirCard 815S User Manual

4. Select Settings > General > Software and Reset.
5. Click the Choose File button.
6. Navigate to the location where the export.cfg file is stored and select it.
By default, mobile hotspot setting files are saved to your Downloads folder.
7. Click the Import button.
Your mobile hotspot is restored with the imported file settings.

Configure Mobile Broadband

You can configure mobile broadband settings to view WAN details such as the active
network, connection status, and signal strength. You can also adjust these settings to
establish which users and applications can access your network.

Enable IP Pass-Through Mode

To turn off the mobile hotspot router functionality and assign the network IP address directly
to the attached device, enable IP pass-through.
If you make this change, the attached device restarts using a different driver configuration.
WARNING:
If you enable this feature, Wi-Fi is disabled and you must use a USB
cable to tether the device.
AirCard 815S Mobile Hotspot
Maintain Your Mobile Hotspot
70