Antenna; Specifications - Honeywell IntelliPath Series Installation And Setup Manual

IGSMHS4G Installation and Setup Guide
• Primary power loss and low battery conditions.
• Cover tamper condition.

Antenna

The communicator comes equipped with an internal antenna. This feature provides
additional security to the installation by making the communicator tamper resistant.
UL

Specifications

Mechanical:
Input Power:
Current Drain:
Backup Battery:
Fault Relay Output:
Positive Trigger
Level:
Negative Trigger
Level:
RF Frequency:
RF Output Power:
Ethernet:
1-4
External antenna options have not been evaluated by UL.
AMPS antennas, such as the 7825-OC antenna, cannot be used with this
product.
Dimensions: 8.4" x 8.0" x 1.5" Weight: 2.4 lbs., with battery.
16.5VAC, 40VA transformer.
(Honeywell transformer # 1361 included.)
220mA standby, 380mA active
6V, 3.1AH, (Honeywell # K14139 included.)
Expected Battery Life: 5 Years (approx.)
Note: The sealed lead acid battery used for backup will have
reduced life expectancy when exposed to elevated temperatures.
The useful life of the battery at 25ºC (77ºF) is approximately 4 years.
At 35ºC (95ºF) this will drop to 2 years and at 45ºC (113ºF) 1 year.
Battery life expectancy should be taken into account when locating
the radio.
Open collector, 12VDC, 0.25W max.
6V or greater = positive trigger. (4V or less = restore.)
4V or less = negative trigger. (6V or greater = restore.)
2G GSM/GPRS/EDGE
3G/4G UMTS/HSPA+
2G GPRS
EDGE
3G UMTS
WCDMA
4G HSPA+
WCDMA
Network Standard: IEEE 802.3u compliant
Data Rate: 10Base-T / 100Base-T with auto detect
Ethernet Cable: Cat. 5 (min), MDI / MDI-X auto crossover
Quad Band, 850/900/1800/1900 MHz
Band V, Band II
+33dBm, GMSK modulation
+27dBm, 8-PSK modulation
+24dBm, QPSK modulation
+24dBm, QPSK modulation
+24dBm, 64 QAM modulation
+24dBm, 64 QAM modulation