Functional Description - Makita AG125 Instruction Manual

FUNCTIONAL
DESCRIPTION
1. Adjuster
ASSEMBLY
1. Nail guide
2. Gauge
6
CAUTION:
• Always disconnect the hose before adjusting or checking function on the
tool.
Adjusting depth of nailing
005373
CAUTION:
• Always disconnect the hose before adjusting the depth of nailing.
To adjust the depth of nailing, turn the adjuster so that the arrow above the
adjuster will point to the number indicated on the adjuster. The depth of nailing
is the deepest when the arrow points to the number 1. It will become shallower
as the arrow points to higher number. The depth can be changed in approx.
1.5 mm increments per graduation. If nails cannot be driven deep enough
1
even when the arrow points to the number 1, increase the air pressure.
CAUTION:
• Always disconnect the hose before carrying out any work on the tool.
Selecting nails
005370
CAUTION:
1
• Do not drive hardened steel nails or stainless steel nails into concrete or
steel plate. If you do so, the nailer may be adversely affected.
D1
Always check the size of the nail head with the gauge on the nail guide before
loading the nailer. Different size nails may be mixed up in the nails you pur-
D2
chase locally.
2
Do not use nails with a head size larger than D1 or smaller than D2.Nails with
a head size larger than D1 cannot be inserted into the nail guide. Nails with a
head size smaller than D2 may move into the contact arm and cannot be
driven.