Makita AG125 Instruction Manual page 9

1
1. Nail
2. Pliers
3. Nail guide
1. Hook
2. Hex wrench 3
Jammed nailer
005379
CAUTION:
• Always disconnect the hose before cleaning a jam.
When the nailer becomes jammed, do as follows:
2
Use pliers to bend the jammed nail so that the nail head comes out of the nail
3
guide. Then remove the jammed nail. After removing the jammed nail, make
sure that the nail guide and the contact arm move smoothly.
Hook
005380
1
The hook is convenient for hanging the tool temporarily. This hook can be
installed on either side of the tool.
To remove the hex wrench 3 from the hook, press up on the end of the hex
2
wrench as shown in the figure.
005381
CAUTION:
• Always disconnect the hose when hanging the tool using the hook.
• Always tighten the hook securing bolt firmly.
• Never hang the tool on a waist belt or the like. Dangerous accidental
firing may result.
Nails
005382
Avoid storing nails in a very humid or hot place or place exposed to direct sun-
light.
9