Specifications - Makita AG125 Instruction Manual

SPECIFICATIONS

Diameter of nail head
Min. hose diameter
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the tool. Be
sure that you understand their meaning before use.
...................Read instruction manual.
.....................Wear safety glasses.
Intended use
The tool is intended for preliminary-work-nailing and fix-
ture-fastening with individual non-connected nails.
2
Model
Air pressure
Nail Iength
Over length
Pneumatic tool oil
Net weight
END101-1
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 93 dB (A)
sound power level: 106 dB (A)
– Wear ear protection. –
The typical weighted root mean square acceleration
value is 18 m/s
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of stand-
ardized documents, EN792 in accordance with Council
Directives, 98/37/EC,
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
AG125
0.44 - 0.83 Mpa (4.4 - 8.3 bar)
75 mm - 125 mm
7.5 - 11.0 mm
260 mm
6.5mm
Turbine oil
1.3 kg
2
.
Yasuhiko Kanzaki CE 2004
Director