Makita AG125 Instruction Manual page 11

1
1. Drain cock
1
1. Air filter
1. Oiler
2. Pneumatic oil
Maintenance of compressor, air set and air hose
005387
After operation, always drain the compressor tank and the air filter. If moisture
is allowed to enter the tool, It may result in poor performance and possible tool
failure.
005388
Check regularly to see if there is sufficient pneumatic oil in the oiler of the air
005389
set. Failure to maintain sufficient lubrication will cause O-rings to wear quickly.
1
2
Keep the air hose away from heat (over 60°C, over 140°F), away from chemi-
005390
cals (thinner, strong acids or alkalis). Also, route the hose away from obstacles
which it may become dangerously caught on during operation. Hoses must
also be directed away from sharp edges and areas which may lead to damage
or abrasion to the hose.
To maintain product SAFETY and RELIABILITY, maintenance and repairs
should be performed by Makita Authorized Service Centers, always using
Makita replacement parts.
11