Chapter 1
Diagrams and Layout
TeraNavigator Setup
To configure your TeraStation, insert the TeraNavigator CD into a Windows computer on the network and follow the
directions, or use the following procedure.
1
Connect cables
TS-XL, TS-XEL
TS-WXL/R1, TS-WXL/1D
TS-RXL
Note:
Use LAN Port 1 for initial setup. After setup, you may connect a second cable to LAN Port 2. If used, configure the IP
address of LAN Port 2 at Network - Setting - IP Address Settings in Settings or NAS Navigator2.
TeraStation User Manual
Network
(Hub or Router)
LAN Port 1
Ethernet Cable
Network
(Hub or Router)
LAN Port 1
Ethernet Cable
Network
LAN Port 1
(Hub or Router)
Ethernet Cable
Fasten the plug with the clamp.*
1
Power Connector
* TS-XL TeraStations Only
AC Cable
Fasten the plug with the clamp.
1
Power Connector
AC Cable
Fasten the plug with the clamp.
1
Power Connector
AC Cable
2
3
Power Outlet
2
3
Power Outlet
2
3
Power Outlet
5