Using Raid 0 Mode - Buffalo TeraStation User Manual

Using RAID 0 mode

1
Change system to normal mode (page 20).
2
3
4
5
6
The Confirm Operation screen will appear. Enter the number shown in the Confirmation Number field within
60 seconds, then click Apply.
7
Follow the instructions displayed on the screen.
You have set up a RAID 0 array. Turn to page 47 to create a shared folder.
TeraStation User Manual
Click System - Storage - RAID Array in Settings.
Click the array you want to configure.
Select all available hard drives.
1 Select RAID 0.
2 Click Create Raid Array.
25