Opening Settings - Buffalo TeraStation User Manual

Opening Settings

To confi gure your TeraStation, use Settings from a browser on a computer connected to the same network.
1
Launch NAS Navigator2. For Windows, click the BUFFALO NAS Navigator2 icon on your desktop. For Mac OS,
double-click the NAS Navigator2 icon in the Dock.
2
3
Note:
• To login as a guest, type "guest" for the Username, leave the password blank, and click OK. Guests can check the
TeraStation's name, IP address, workgroup, and disk status. Regular users can change their login passwords as well
as check the TeraStation name, IP Address, workgroup, and disk status. Administrator user, "admin" by default, can
confi gure all options.
4
Notes:
• Settings supports Firefox 1.5 or later, Internet Explorer 6.0 with SP2 or later, and Safari 3 or later. It may not display
properly in other browsers.
• Settings may not display correctly in Internet Explorer due to your browser security settings. If this happens, navigate
to Tools - Internet Options - Security on Internet Explorer, and set the Security Settings to Local intranet.
Settings is organized by tabs across the top. The following tabs are available.
TeraStation User Manual
Right-click the TeraStation icon (on Mac OS, click the icon
while holding down the control key) and select Settings from
the menu.
Notes:
• If multiple TeraStations and TeraStations are connected
to the network, multiple icons will be displayed. Click the
correct TeraStation.
• Record the TeraStation's IP address from the bottom right of
the NAS Navigator2 window.
1 Enter your username and password, and click Login.
Initially, use the default username and password:
Username: admin
Password: password
2 After you log in, change the password for security.
This is Settings. This page displays the TeraStation's current
status, including name, IP address, workgroup, and hard disk
settings.
16