Using Normal Mode - Buffalo TeraStation User Manual

Using Normal mode

1
2
3
Click Delete RAID Array.
4
When the RAID Array operation window opens, click Apply.
5
The Confirm Operation screen will appear.
Enter the number shown in the Confirmation Number field within 60 seconds, and click Apply.
6
Follow the instructions displayed on the screen.
You have now set up Normal mode. Refer to page 47 to create a shared folder.
Confirm Operation screen
When you perform any of the following tasks, a Confirm Operation screen is displayed . To
continue, enter the displayed number within 60 seconds and click Apply.
• Changing structures of RAID array (Create/Delete)
• Delete Folder
• TeraStation's Restore Factory Defaults
• Format TeraStation
• Empty recycle bin of each folder
TeraStation User Manual
Click System - Storage - RAID Array in Settings.
Select the array you want to configure.
• Format Array or Disk
• Remove Disk
• Rebuild RAID array
• Configure hot spare
• Configure normal mode
Confirm Operation
Screen
20