Buffalo TeraStation User Manual page 129

Port Trunking
Port Trunking
Click Modify
Settings to
change settings.
Authentication Method
Workgroup Name
WINS Server IP Address
NT Domain Name
NT Domain Controller
Name
Workgroup/
Domain
Click Modify
Settings to
change settings.
Active Directory
Domain Name
(NetBIOS Name)
Active Directory
Domain Name (DNS/
Realm Name)
Administrator
Password
TeraStation User Manual
Enable Port Trunking to use two Ethernet connections to the TeraStation. The
following configurations are available:
• Off : Do not use port trunking.
• Round-robin policy : Sets a round-robin policy for fault tolerance and load
balancing.
• Active-backup policy : Sets an active-backup policy for fault tolerance.
• XOR policy : Sets an XOR (exclusive-or) policy for fault tolerance and load
balancing.
• Broadcast policy : Sets a broadcast policy for fault tolerance.
• Dynamic link aggregation : Sets an IEEE 802.3ad dynamic link aggregation policy.
• Adaptive transmit load balancing (TLB) : Sets a Transmit Load Balancing (TLB) policy
for fault tolerance and load balancing.
Select the method to join the network (Workgroup, NT Domain, or Active Directory).
Workgroup is the default. Networking knowledge is required to configure other
methods. Consult your network administrator for details.
To join a workgroup, enter the name of your workgroup.
* You can enter up to 23 bytes(UTF-8).
* Alphanumeric characters, multi-byte characters, -(hyphen), _(underscore), and
.(dot) may be used.
* Do not use a symbol as the first character.
Enter the IP address of your WINS server to use WINS Server.
Enter NT Domain Name to use NT Domain as the method to join the network.
* You can enter up to 23 bytes(UTF-8).
* Alphanumeric characters, multi-byte characters, -(hyphen), _(underscore), and
.(dot) may be used.
* Do not use a symbol as the first character.
Enter NT Domain Controller Name to use NT Domain as a method to join the
network. Register the computer account which has the same name as the
TeraStation to the Domain Controller.
* You can enter up to 63 bytes(UTF-8). Do not use multi-byte characters.
* Alphanumeric characters, -(hyphen), and _(underscore) may be used.
* Do not use a symbol as the first character.
Enter Active Directory Domain Name (NetBIOS Name) to use Active Directory as a
method to join the network.
* You can enter up to 23 bytes(UTF-8).
* Alphanumeric characters, multi-byte characters, -(hyphen), _(underscore), and
.(dot) may be used.
* Do not use a symbol as the first character.
Enter Active Directory Domain Name (DNS/Realm Name) when selecting Active
Directory as a method to join the network.
* You can enter up to 255 bytes(UTF-8). Do not use multi-byte characters.
* Alphanumeric characters, -(hyphen), _(underscore), and .(dot) may be used.
Enter Administrator Password.
* This must be entered if NT Domain or Active Directory is selected for
Authentication Method.
* You can enter up to 256 bytes(UTF-8). Do not use multi-byte characters.
* Alphanumeric characters, -(hyphen), and _(underscore) may be used.
* Do not use a symbol as the first character.
128