Safety Tips • Position on a flat, stable surface. • A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components on this product. • Consult Local and National Standards to comply with the following: - Health and Safety at Work Legislation - BS EN Codes of Practice...
• Batter plate BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.
Installation 1. Place the unit on a heat-resistant surface. Avoid placing it on or close to easy flammable materials. Maintain a distance of 20cm (7 inches) between the appliance and walls or other objects for ventilation. 2. Keep the unit away from splashing water and countertop’s edge. Note: Before using for the first time, clean the lid, basket, batter plate and the oil tank with warm soapy water.
Page 5
Cooking POWER switch KEEP WARM HEATING Thermostat with indicator light indicator light indicator light 1. Connect the appliance to the mains power supply. 2. Set the POWER switch to I (ON position). The power indicator light illuminates. 3. Set the thermostat to the desired temperature. The HEATING indicator light (red) turns On. The appliance begins to heat the oil.
• For best performance, BUFFALO recommend that the appliance is cleaned after each day of operation. • Pull the air filter out of its slot on the bottom of the appliance. Clean with a vacuum cleaner.
Page 7
Appliance stops Overheating protection 1. Allow the appliance to cool sufficiently. working suddenly 2. Press the reset button. If the problem persists, Call BUFFALO agent or qualified technician Appliance does Faulty thermostat Call BUFFALO agent or qualified technician not reach set...
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of BUFFALO. Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the right to change specifications without notice.