Related Manuals for Buffalo FC374
Summary of Contents for Buffalo FC374
- Page 1 HEAVY DUTY FRYER INSTRUCTION MANUAL Model . Modéle Modell . Modello . Modelo . Malli FC374 FC375 FC376 FC377...
-
Page 2: Safety Tips
Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local authorities. If the power cord is damaged, it must be replaced by a BUFFALO agent or a recommended qualified technician in order to avoid a hazard. -
Page 3: Installation
Introduction Thank you for purchasing the Buffalo Electric Fryer. Before operating this product, you should read through the instructions and hints in this manual, this will help you enjoy effective, trouble free results from using the product. Keep the instructions in a safe place for future reference. - Page 4 Fitting the Element and Control box to the Fryer body. Position the Element/Control Box into the body of the fryer, locating it into the hole (A) at the side of the main body, using the pin (B) on the side of the Control Box. Rotate the control unit and put spring pin(C) into the hole(D) of the main body, You can hold the position if the appliance is not to use.
-
Page 5: Operation
Operation 1. Please ensure Oil level is between Min and Max lines. 2. Turn on the power switch. Then turn the thermostat dial to the required temperature setting. 3. Allow time for the oil temperature to reach the required setting. While the oil is heating, the green light will be on. -
Page 6: Cleaning, Care And Maintenance
PROGRAM : There are a total of 6 programmable timer settings. The default factory program settings are given below Program Factory Preset 00:30 01:00 01:30 02:00 02:30 03:00 Time To change the length of a program select the program you want to change by scrolling using the PROGRAM button. -
Page 7: Troubleshooting
If your Buffalo FRYER does not operate, please check the following before placing a service call. It is connected to the correct power supply. The machine is plugged in correctly and power is switched on. - Page 8 Electrical Wiring –FC374, FC375 FC374 and FC375 are supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as standard. The plug is to be connected to a suitable mains socket. This appliance is wired as follows: •...
- Page 9 All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of BUFFALO. Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the right to change specifications without notice...
- Page 10 0845 146 2887 0 8 0 0 - 2 9 1 2 9 040 - 2628080 0800- 29 2 29 0160 34 28 80 0800 - 1860806 901-100133 vendas@nisbets.pt...
-
Page 11: Declaration Of Conformity
Double Fryer - 2x8Ltr 2.9kW with Timer Single Fryer - 1x8Ltr 6kW with Timer Double Fryer - 2x8Ltr 6kW with Timer Model • Modèle • Modell • Modello • Modelo • Malli FC374 FC375 FC376 FC377 Application of Council Directives(s) Low Voltage Directive (LVD) 2014/35/EC Toepassing van Europese Richtlijn(en) •... - Page 12 FC374_FC375_FC376_FC377_ML_A5_V1_20191106...