Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Buffalo DL891-A
Summary of Contents for Buffalo DL891-A
- Page 1 Fryer Instruction manual Model DL891-A / DL892-A...
-
Page 2: Safety Tips
Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local authorities. • If the power cord is damaged, it must be replaced by a BUFFALO agent or a recommended qualified technician in order to avoid a hazard. Product Description •... -
Page 3: Operation
Telephone Helpline: 1300225960 Operation Thermal Cut-out reset cover Thermal Cut-out reset switch Power indicator light Thermostat Element Safety switch Connecting the Element/Control Panel The Element and Control Panel are supplied as a single detachable part to aid in cleaning the appliance. To connect to the body of the appliance: Locate the lugs on the rear of the appliance with the tabs on the rear of the element/panel unit. -
Page 4: Cleaning, Care And Maintenance
Check the temperature with a suitable probe thermometer; 40ºC is the MAXIMUM temperature at which oil should be removed. • For best performance, BUFFALO recommend that the appliance is cleaned after each day of operation. Note: Failure to clean the appliance regularly may result in premature activation of the thermal cut-out switch. -
Page 5: Troubleshooting
Telephone Helpline: 1300225960 Troubleshooting If your BUFFALO appliance develops a fault, please check the following table before making a call to the Helpline. Fault Probable Cause Action The appliance is not working The appliance is not switched on Check the appliance is plugged in correctly... -
Page 6: Electrical Wiring
BUFFALO. Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the right to change specifications without notice. -
Page 7: Declaration Of Conformity
DECLARATION OF CONFORMITY Equipment Type Fryer Model DL891-A DL892-A Legislation C-Tick AS/NZ 3820 Essential Safety Requirements for Low Voltage Electrical Equipment Standards EN 55014-1:2006, EN 55014-2:1997+A1 EN 61000-3-2:2006, EN 61000-3-3:1995+A1+A2 EN 60335-2-37:2002+A1 EN 60335-1:2002+A11+A1+A12+A2+A13 with AS/NZS 60335-1:2002+ A1+A2+A3, EN 62233:2008... - Page 8 DL891_DL982_A5_v2...