B Troubleshooting; Warning - Honeywell Sensepoint XRL Instruction Manual

B.1 Warning
Description
Warning 1 Calibration Overdue
Warning 3 BLE failure (BLE version only)
Warning 4 Time/date not set (RTC not set) / RTC reset
abnormally
Warning 5 Log memory corrupted (CRC not matched)
Warning 6 Certificate is corrupted or missing certificate
Warning 7 Over-range warning
Warning 8 Under-range warning
44
Troubleshooting
Troubleshooting
Calibrate the unit.
Power-cycle the unit. If this warning occurs again, contact the
manufacturer.
Set the time in the detector using the app. If this warning occurs again,
contact manufacturer.
Power-cycle the unit. The event log may be lost if corruption has
occurred.
Contact manufacturer.
Calibrate the unit.
Calibrate the unit.
Appendix
B