Chapter 1 Setup; Teranavigator Setup - Buffalo TeraStation Setup Manual

Chapter 1
Setup

TeraNavigator Setup

To configure your TeraStation, insert the TeraNavigator CD into a Windows computer on the network and follow the
directions, or use the following procedure.
Connect cables
1
<TS-XL, TS-XEL Series>
<TS-WXL/R1, TS-WXL/1D Series>
<TS-RXL Series>
Note:
Use LAN Port 1 for initial setup. After setup, you may connect a second cable to LAN Port 2. If used, configure the IP
address of LAN Port 2 at [Network] - [Setting] - [IP Address Settings] in the TeraStation Web Admin or NAS Navigator2.
TeraStation Setup Manual
Network
(Hub or Router)
LAN Port 1
Ethernet Cable
Network
(Hub or Router)
LAN Port 1
Ethernet Cable
Network
LAN Port 1
(Hub or Router)
Power Connector
Ethernet Cable
Fasten the plug with the clamp.*
1
Power Connector
* TS-XL Series Only
Fasten the plug with the clamp.
1
Power Connector
AC Cable
Fasten the plug with the clamp.
1 2
AC Cable
2 3
Power Outlet
2 3
Power Outlet
3
Power Outlet
3