Buffalo TeraStation Setup Manual page 5

Hold down the power button on the TeraStation for three seconds to turn it on.
2
3
Wait until the green power LED changes from flashing to lit. In the TS-RXL Series, the LED is not
illuminated. Continue to Step 4.
4
Insert the TeraNavigator software CD into your computer. The TeraNavigator wizard will launch.
Click [Begin Installation].
Notes:
• For Windows Vista, click [Run TSNavi.exe] when the auto-play screen is displayed. When [A program needs
your permission to continue] is displayed, click [Continue].
• For Mac OS, open the CD and double click on the [TeraNavigator] icon.
• Disable your anti-virus software and firewall before continuing. You may not be able to install the software if
anti-virus software or a software firewall are enabled. After you've finished setup, re-enable your firewall and
antivirus software.
When the message [Completed] is displayed, click [Launch NAS Navigator2]. NAS Navigator2 will launch.
5
Note: Alternately, you can click [Next] to display more information about the power mode switch, which can
turn the TeraStation on and off automatically.
6
TeraStation Setup Manual
Note:
If the wizard doesn't open automatically, navigate to the TeraNavigator CD
and double-click the
Step through the wizard to connect cables and install software.
Right-click on your TeraStation's icon, and choose [Properties] - [IP Settings].
Note:
For Mac OS, hold the Control key, click on the TeraStation icon, then click [Open
Web Admin] - [IP Address].
icon (TSNavi.exe).
4