Opening The Web Admin - Buffalo TeraStation Setup Manual

Opening the Web Admin

1
Double-click [Buffalo NAS Navigator2] on your computer's Desktop.
Note: Click the [NAS Navigator2] icon in the Doc if you are using Mac OS.
2
This example shows the TS-XL series' display.
3
Note:
To login as a guest, type "guest" for the Username, leave the password blank, and click [OK]. Guests can check
the TeraStation's name, IP address, workgroup, and disk status. Regular users can change their login passwords
as well as check the TeraStation name, IP Address, workgroup, and disk status. Administrator user, "admin" by
default, can configure all options.
4
The Web Admin is displayed.
Notes:
• The Web Admin supports Firefox 1.5 or later, Internet Explorer 6.0 with SP2 or later, and Safari 3 or later. It may not
display properly in other browsers.
• The Web Admin may not display correctly in Internet Explorer due to your browser security settings. If this happens,
navigate to [Tools] - [Internet Options] - [Security] on Internet Explorer, and set the Security Settings to [Local Intranet].
TeraStation Setup Manual
Right-click the TeraStation icon and choose [Open Web Admin].
Notes:
• For Mac OS, press and hold the Control key, click on the TeraStation icon,
then click [Open Web Admin].
• Please record the TeraStation's IP address, which is displayed at the
bottom right of the NAS Navigator2 window.
1 Enter Username and Password.
The following settings are the factory defaults.
Username: admin
Password: password
2 Click [Login].
14