Buffalo TeraStation Setup Manual page 35

• Using Normal mode
1
2
3
Click [Create RAID Array].
4
When [Are you sure you want to change RAID mode?] is displayed, click [Apply].
5
The confirm operation screen will appear. Enter the number shown in the [Confirmation Number] field within 60
seconds, and click [Apply].
6
Follow the instructions displayed on the screen.
You have now set up Normal mode. Refer to page 16 to create a shared folder.
Confirm Operation screen
When you perform any of the following tasks, a confirmation screen is displayed . To continue, enter the displayed
number within 60 seconds and click [Apply].
• Changing structures of RAID array (Create/Delete)
• Delete Folder
• TeraStation's Restore Factory Defaults
• Format TeraStation
• Empty recycle bin of each folder
TeraStation Setup Manual
Click [System] - [Storage] - [RAID Array] in the Web Admin.
Select the array you want to configure.
• Format Array or Disk
• Remove Disk
• Rebuild RAID array
• Configure hot spare
• Configure normal mode
Confirm Operation Screen
34