Adding Groups - Buffalo TeraStation Setup Manual

Adding Groups

1
2
Notes:
• Group names can contain up to 12 alphanumeric letters. Hyphens, underscores, and periods may be used. Do not use
any symbol except underscore as a first letter of the name.
• Group descriptions may contain up to 50 alphanumeric characters (25 characters for 2-byte characters). Hyphens and
underscores may also be used. Do not use a number or symbol as the first character of a group description.
• You may register up to 300 groups with the TeraStation.
• Repetitive deletions and additions of groups may cause the quota feature to not work properly. Even though the data
is copied by the backup function of the TeraStation, the Quota feature may not work properly if a user ID/group ID is
duplicated. In such a case, use a user name/group name of an unused user ID or group ID.
• f the Group ID is left blank, a Group ID will be automatically assigned. When using the Quota feature, use numbers
between 1000 and 1999 to set a group ID manually. Make sure that a user ID does not duplicate to other users.
• To set a quota for a group, check [Enable] for Group Quota, and enter the maximum disk space allotted in GB.
TeraStation Setup Manual
1 Click [Users/Groups] - [Local Groups] in the Web Admin.
2 Click [Create Group].
1 Enter Group Name and Description.
2 Select users who join a group, click [Add].
3 Click [Save].
22