Cisco 8811 User Manual page 108

Cisco Headset 500 Series
The Cisco Headset 531 and 532 can be used as standard headsets on the phones. You plug the headset into
the headset port using the RJ connector.
The Cisco Headset USB Adapter is available for use with the Cisco Headset 531 and 532. With the adapter,
you can test your headset, and customize your bass and treble, gain or microphone volume, and sidetone or
feedback settings. The adapter also retains your settings if you switch between phones.
The adapter makes it easy to use basic and advanced call features. With a single tap of the headset
you can answer an incoming call. A quick double tap, and an incoming call is sent to your voicemail account.
To make a call, tap once and enter the phone number using your phone keypad. Another single tap and your
active call is placed on hold. Press
The Cisco USB adapter is supported on Cisco IP Phone 8851, 8851NR, 8861, 8865, and 8865NR. To check
your phone model, press Applications
your phone model.
The Cisco Headset 531 and Cisco Headset 532 require Firmware Release 12.1(1) and higher. Upgrade your
phones to the latest firmware before using these headsets.
Figure 7: Cisco Headset USB Adapter
Related Topics
Connect a Standard Headset, on page 101
Connect a USB Headset, on page 102
Adjust Your Bass and Treble, on page 97
Adjust Your Speaker Feedback, on page 97
Cisco IP Phone 8800 Series User Guide
96
and hold for 2 seconds, and your call ends.
and select Phone information. The Model number field shows
Accessories
button,