Starting Gm Operation - Standard Horizon QUANTUM AIS GX6000 Owner's Manual

12.2

STARTING GM OPERATION

To start GM operation, configure the GM Group Directory setting in
setup menu. Otherwise, you cannot start the GM operation. Refer to
section "12.1.1 Setting Up GM Group Directory" for details.
[ ]  "GM"
1.
2. Rotate the DIAL/ENT knob to select the desired
category ("HISTORY" or "MEMORY"), then press the
[SELECT] soft key.
3. Rotate the DIAL/ENT knob to select a group you want
to monitor, then press the [SELECT] soft key.
The GM operation starts and the GM target display
appears.
4. Press the CLEAR key to return to radio operation.
12.2.1 Changing the GM Group Being Monitored
1. On the GM target display, press one of the soft keys
to show the key selections.
2. Press the [TG LIST] soft key.
3. Press the [CHG GP] soft key.
4. Rotate the DIAL/ENT knob to select the name of the
group you want to start monitoring, then press the
[ENTER] soft key.
94
NOTE