Dsc Setup; Individual Directory; Individual Reply; Individual Acknowledgment - Standard Horizon QUANTUM AIS GX6000 Owner's Manual

17 DSC SETUP

17.1

INDIVIDUAL DIRECTORY

The GX6000 has a DSC directory that allows you to store a vessel or person's
name and the associated MMSI you wish to contact via individual calls, position
requests and position report transmissions.
To transmit an individual call you program this directory with information of the
vessel you wish to contact, similar to a cellular phone's telephone directory.
Refer to section "10.4.1 Setting up the Individual / Position Call Directory"
for details.
17.2

INDIVIDUAL REPLY

This menu item sets up the radio to automatically (default setting) or manually
respond to a DSC Individual call requesting you to switch to a working channel
for voice communications. When "MANUAL" is selected the MMSI of the calling
vessel is shown allowing you to see who is calling. This function is similar to
caller id on a cellular phone.
Refer to section "10.4.2 Setting up the Individual Call Reply" for details.
17.3

INDIVIDUAL ACKNOWLEDGMENT

The radio can be setup to transmit a reply automatically (default) or set so the
radio will not reply to an individual call.
Refer to section "10.4.3 Enabling the Individual Call Acknowledgment" for
details.
17.4

INDIVIDUAL RINGER

The radio can be setup to ring like a telephone to alert you the radio received
a DSC individual call. The default setting is 2 minutes, however this can be
changed to 5, 10 or 15 seconds with the procedure below.
Refer to section "10.4.6 Setting up the Individual Call Ringer" for details.
17.5

GROUP DIRECTORY

For this function to operate, the same group MMSI must be programmed into all
the DSC VHF radios within the group of vessels that will be using this feature.
Refer to section "10.5.1 Setting up a Group Call" for details.
118