Cisco Prisma II Installation And Operation Manual page 38

The ICIM Front Panel,
The ICIM Keypad
The ICIM keypad has twelve keys that allow you to input and monitor operational
parameters. The table below lists each key and a brief description of its function.
Button
STAT
CFG
ALRM


SEL
ICIM
SHIFT

ENTER
MAIN
78-4006323-01 Rev C
Continued
Displays status information for the selected module
Displays configuration information for the selected module
Displays all of the parameters in alarm for a selected module
Moves the menu selection area up. Also increases numerical
readings of selected configuration parameters
Moves the menu selection area down. Also decreases numerical
readings of selected configuration parameters
Selects the highlighted parameter
Displays ICIM module information such as firmware version,
serial number, and baud rate
Shifts function of a keypad button to the function or number label
just above that button
Decreases numerical readings of selected configuration
parameters
Increases numerical readings of selected configuration parameters
Enters input data (if valid)
Exits the current menu and displays the MAIN ICIM menu
Operation Using ICIM
Function
3-5