Installing The Ecs License; Enabling Enhanced Charging Service - Cisco ASR 5000 Series Administration Manual

Enhanced Charging Service Configuration

Installing the ECS License

The ECS in-line service is a licensed Cisco product. Separate session and feature licenses may be required. Contact your
Cisco account representative for detailed information on licensing requirements.
For information on installing and verifying licenses, refer to the Managing License Keys section of the Software
Management Operations chapter in the System Administration Guide.

Enabling Enhanced Charging Service

Enhanced charging must be enabled before configuring charging services.
To enable Enhanced Charging Service, use the following configuration:
configure
require active-charging
context local
interface <interface_name>
server ftpd
end
Notes:
 The
require active-charging
resource subsystem can appropriately reserve adequate memory for ECS-related tasks. After configuring this
command, the configuration must be saved and the system rebooted in order to allocate the resources for ECS
on system startup.
ip address <ip_address/mask>
exit
command must be configured before any services are configured, so that the
Cisco ASR 5x00 Enhanced Charging Services Administration Guide ▄
Initial Configuration ▀
85