▀ Configuring Enhanced Features
Configuring Flow Aware Packet Acceleration Feature
To enable the Flow Aware Packet Acceleration feature, use the following configuration:
configure
active-charging service <service_name>
[no] accelerate-flow
end
To verify your configuration, in the Exec mode, enter the following command:
show active-charging accelerate-flow
Configuring Retransmissions Under Rulebase or Service Level CLI
To enable retransmission under Rulebase or Service Level base, use the following configuration:
configure
active-charging service <ecs_service_name>
rulebase <rulebase name>
retransmissions-counted
end
Notes:
Use the
no retransmission counted
To verify your configuration, in the Exec mode, enter the following command:
show active-charging rulebase name <rulebase_name>
Configuring Websockets
This section lists the syntax to enable or disable websocket flow detection feature.
To enable websocket flow detection feature, use the following configuration:
configure
active-charging service <ecs_service_name>
rulebase <rulebae name>
websocket flow-detection <protocol>
end
▄ Cisco ASR 5x00 Enhanced Charging Services Administration Guide
116
command to disable retransmission counted feature.
Enhanced Charging Service Configuration