Configuring Redirection Of Subscriber Traffic To Ecs; Creating An Ecs Acl; Applying An Acl To An Individual Subscriber - Cisco ASR 5000 Series Administration Manual

▀ Configuring Enhanced Features
 Optional: To specify the user password for RADIUS prepaid services, in the Rulebase Configuration Mode,
enter the following command:
cca radius user-password [ encrypted ] password <password>
 Ensure the RADIUS server parameters are configured. For more information , if you are using StarOS 12.3 or an
earlier release, refer to the AAA and GTPP Interface Administration and Reference. If you are using StarOS
14.0 or a later release, refer to the AAA Interface Administration and Reference.

Configuring Redirection of Subscriber Traffic to ECS

User traffic is directed through the ECS service inspection engine by using Access Control List (ACL) mechanism to
selectively steer subscriber traffic.
To configure redirection of subscriber traffic to ECS:
Step 1 Create an ECS ACL as described in the
Step 2
Apply an ACL to an individual subscriber as described in the
Step 3
Apply an ACL to the subscriber named default as described in the
section.
Step 4
Apply the ACL to an APN as described in the
Important:
the extent that the most common or likely commands and/or keyword options are presented. In many cases,
other optional commands and/or keyword options are available. Refer to the Command Line Interface
Reference for complete information regarding all commands.

Creating an ECS ACL

To create an ACL to use in steering subscriber traffic through ECS, use the following configuration:
configure
context <context_name>
ip access-list <access_list_name>
redirect css service <ecs_service_name> <keywords> <options>
end
Notes:

<ecs_service_name>

Applying an ACL to an Individual Subscriber

IP ACLs are applied to subscribers via attributes in their profile. The subscriber profile could be configured locally on
the system or remotely on a RADIUS server.
▄ Cisco ASR 5x00 Enhanced Charging Services Administration Guide
102
Creating an ECS ACL
Applying the ACL to an APN
Commands used in the configuration examples in this section provide base functionality to
must be the enhanced charging service's name; no CSS service needs to be configured.
section.
Applying an ACL to an Individual Subscriber
Applying an ACL to the Subscriber Named default
section.
Enhanced Charging Service Configuration
section.