Configuring Url Filtering Feature - Cisco ASR 5000 Series Administration Manual

Enhanced Charging Service Configuration
Notes:
Use the
no websocket flow-detection
disable retransmission counted feature.
To verify your configuration, in the Exec mode, enter the following command:
show active-charging rulebase name <rulebase_name>

Configuring URL Filtering Feature

This section describes how to configure the URL Filtering feature to simplify rules for URL detection.
To create a group-of-prefixed-URLs, use the following configuration:
configure
active-charging service <ecs_service_name>
group-of-prefixed-urls <prefixed_urls_group_name>
end
To configure the URLs to be filtered in the group-of-prefixed-URLs, use the following configuration:
configure
active-charging service <ecs_service_name>
group-of-prefixed-urls <prefixed_urls_group_name>
prefixed-url <url_1>
...
prefixed-url <url_10>
end
To enable or disable the group in the rulebase for processing prefixed URLs, use the following configuration:
configure
active-charging service <ecs_service_name>
rulebase <rulebase_name>
url-preprocessing bypass group-of-prefixed-urls <prefixed_urls_group_name>
...
url-preprocessing bypass group-of-prefixed-urls <prefixed_urls_group_name>
end
Notes:
command or
default websocket flow-detection
Cisco ASR 5x00 Enhanced Charging Services Administration Guide ▄
Configuring Enhanced Features ▀
command to
117