Cisco ASR 5000 Series Administration Manual page 118

▀ Configuring Enhanced Features
 A maximum of 64 group-of-prefixed-urls can be created and configured.
 A maximum of 10 prefixed URLs can be configured in each group-of-prefixed-urls.
 In a rulebase, multiple group-of-prefixed-urls can be configured to be filtered.
Verifying your Configuration
To verify your configuration, in the Exec Mode, enter the following command:
show active-charging group-of-prefixed-urls name <prefixed_urls_group_name>
Configuring URL-based Re-addressing
The URL-based re-addressing feature is configured and enabled via system CLI commands using
command options within an Active Charging Service.
Use the following commands in the ACS Charging Action Configuration Mode to configure the URL server to re-
address for the specified charging action.
configure
active-charging service <service_name>
charging-action <charging_action_name>
flow action url-readdress server <ipv4_address> [ port <port_number> ]
no flow action
end
Configuring X-Header Insertion and Encryption Feature
This section describes how to configure the X-Header Insertion and Encryption features, collectively known as Header
Enrichment.
Configuring X-Header Insertion
This section describes how to configure the X-Header Insertion feature.
Important:
information.
To configure the X-Header Insertion feature:
Step 1
Create/configure a ruledef to identify the HTTP packets in which the x-headers must be inserted. For information on
how to create/configure ruledefs, see the
Step 2 Create/configure a rulebase and configure the charging-action, which will insert the x-header fields into the HTTP
packets. For information on how to create/configure rulebases, see the
▄ Cisco ASR 5x00 Enhanced Charging Services Administration Guide
118
This feature is license dependent. Please contact your Cisco account representative for more
Configuring Rule Definitions
Enhanced Charging Service Configuration
section.
Configuring Rulebase section.
charging-action