Led Status Indicators - ABB PSE 18 Installation And Commissioning Manual

6.1.2.1 LED status indicators

The LED status indicators work as in table 6.1:
Table 6.1
LED Color
Ready Green
Run Green
Protection Yellow
Fault Red
When fault or protection LED is activated, the LCD display will show the actual
fault or protection as an event code. See table 10.1.
Softstarters Type PSE18...PSE370 Installation and commissioning manual 1SFC132057M0201
Description
• Off: when control supply voltage U s is off or uncon-
nected.
• Flashing light when control supply voltage U s is On
and operational voltage U e is Off.
• Steady light when control supply voltage U s is On,
and operational voltage U e is On.
• Off when the motor not is running.
• Flashing light when softstarter is controlling opera-
tional voltage U e during start or stop ramp.
• Steady light when full operational voltage U e is on
at Top of Ramp.
• Off: when the softstarter has not tripped on any
protection
Steady light on protection when reset is not pos-
•
sible.
• Flashing light on protection when reset is possible.
• Off: when the softstarter has not tripped on any
fault
Steady light on fault when reset is not possible.
•
• Flashing light on fault when reset is possible.
Chapter 6 47