Makita DVC860L Instruction Manual page 5

Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Take particular care and attention.
･
Warning! The cleaner may contain
hazardous dust.
･
Never stand on the cleaner.
･
Dust class L (light). The cleaners are
capable of picking up dust class L.
Follow
relating to dusts and to occupational
health and safety.
･
DOUBLE INSULATION
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of the European Directives,
on Waste Electric and Electronic Equipment
and Batteries and Accumulators and Waste
Batteries and Accumulators and their
implementation in accordance with national
laws, electric equipment and batteries and
battery pack(s) that have reached the end
of their life must be collected separately and
returned to an environmentally compatible
recycling facility.
Intended use
The tool is intended for collecting both wet and dry dust.
The tool is suitable for commercial use, for example in
hotels, schools, hospitals, factories, shops, offices and
rental businesses.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted
according to EN/IEC60704:
Sound pressure level (L
Uncertainty (K) : 3.0 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
your country's regulations
noise level determined
) : 75 dB (A)
pA
END118-1
Vibration
The vibration
determined according to IEC 60335-2-69:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Corded and Cordless Vacuum Cleaner
Model No./ Type: DVC860L, DVC861L
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60335
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
000331
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
CORDED AND CORDLESS
VACUUM CLEANER SAFETY
ENE084-1
WARNINGS
WARNING! IMPORTANT READ CAREFULLY all
safety warnings and all instructions BEFORE USE.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
ENF002-2
1. Before use, make sure that this cleaner must
be used by people who have been adequately
instructed on the use of this cleaner.
2. If foam/liquid comes out, switch off immediately.
3. Clean the water level limiting device regularly
and examine it for signs of damage.
ENG905-1
4. Do not use the cleaner without the filter.
Replace a damaged filter immediately.
5. USE OF EXTENSION CORD. When using an
extension cord because of the great distance
to your power source, try to employ a cord
that is sufficiently thick but not too long, or
cleaner
affected. For outdoor applications use an
extension cord suitable for outdoor use.
5
total value (tri-axial
2
) : 2.5 m/s or less
h
2
25.9.2014
Yasushi Fukaya
Director
performance will
ENG900-1
vector sum)
ENH038-3
ENB124-1
be adversely