Figure 3-53 Table Only View - Omega OM-DAQXL-1 Series User Manual

3.4.4 Table Only view
The table only view provides a tabular view of statistical values for all currently
configured channels.
1
8
1. Channels
This column shows the channel number and name assigned to each channel.
2. Value
This column shows the current calculated value for each input in the
engineering units configured.
3. Peak to Peak
This column gives an indication of the difference between the maximum
and minimum values of the data for each channel.
4. Average
This column shows the average value of the data for each channel.
5. Minimum
This column indicate the minimum value of the data for each channel.
6. Maximum
This column indicates the maximum value of the data for each channel.
7. Root Mean Square
This column indicates the RMS value of the data for each channel.
8. Table
Shows the channel data for all currently configured channels.
2 3

Figure 3-53 Table Only View

Standalone Operation
4 5
3
6 7
3-44