Select Channels; Figure 3-49 Select Channels Screen - Omega OM-DAQXL-1 Series User Manual

3
Standalone Operation

3.4.1 Select Channels

Before channel data can be viewed, it must first be assigned to a group. This
is done through the Select Channels screen which can be accessed through the
Display Channels button on the home toolbar or from the Channel List screen
toolbar. The Select Channels screen will display all configured channels and
indicate a check mark next to any channels assigned to the currently selected
group. Channels can be assigned to multiple groups.
1
2
3
1. Group Selection
2. Channel Selection
3. Apply
4. Cancel
5. Help
3-41

Figure 3-49 Select Channels Screen

These buttons let you select one group at a time to assign channels to.
All currently configured channels are shown in this area. You can select four
channels per group using the checkboxes. No two channels assigned to the
same group can have the same color.
This saves the current channels selections and returns to the previous screen.
Immediately cancel the operation and returns to the previous screen.
Provides context-sensitive help based on the current screen.
4
5