Connecting The Ac Adaptor; Powering On The Data Logger - Omega OM-DAQXL-1 Series User Manual

It is recommended to fully charge the battery using the included AC adapter
after installation. When the device is powered off the LED next to the power
switch will be illuminated to indicate that the battery is charging. In addition,
when the device is powered on, the Power/Charging LED will be flashing green
and the battery life indication on the LCD will show a lightning bolt symbol over
the battery to indicate that it is being charged.
2.11.2 Connecting the AC Adapter
The AC adapter is a universal input (100 – 240 VAC) adapter that provides 12
VDC output to power the data logger. The device ships with a power cord with
the appropriate plug for the outlet type in your country or region.
1. Plug the AC cord into the AC adapter.
2. Connect the DC output plug of the adapter into the OM-DAQXL power port.
3. Plug the AC cord into the AC power outlet.
4. Turn on the power switch on the OM-DAQXL.

2.11.3 Powering on the Data Logger.

After you have connected the battery and/or AC adapter you can now power
on the data logger by pushing the power switch to the on position. The data
logger will begin the boot process at which time a boot splash screen showing
the OMEGA logo and a progress bar will appear. After approximately 30
seconds the data logger login screen will be shown. At this point you can login
and begin configuring the data logger. The following chapter details all of the
configuration steps necessary to begin using the data logger.
2
Hardware
2-14