Figure 3-16 Data Ranges - Digital Frequency - Omega OM-DAQXL-1 Series User Manual

When configured for frequency measurement mode and measurement type
frequency, the data ranges screen will appear as shown below.
1
2
3
1. Engineering Unit
Allows selection of various units for frequency measurement.
2. Input Frequency
Shows the input range in terms of the selected engineering units.
3. Display Range
Shows the display range also in terms of the selected engineering units.
4. Graph Range
This is a subset of the display range. This determines what portion of the
full display range will be shown initially in the waveform views. This range
can also be adjusted from the waveform view.
5. Decimal Places
Select the number of decimal places for display here.

Figure 3-16 Data Ranges - Digital Frequency

3
Standalone Operation
5
4
3-14