Quick Start Guide; Rear Panel - NETGEAR Nighthawk EX7000 Quick Start Manual

Hardware
Front Panel and Side Panel
Support
Thank you for purchasing this NETGEAR product. You can visit
user manuals, and join our community. We recommend that you use only official NETGEAR support resources.
For the current EU Declaration of Conformity, visit http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.
NETGEAR, Inc.
First Floor Building 3 University Technology Centre
Curraheen Road Cork Ireland
Corporate Office Phone 353 21 2333 200.
NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134 USA

Rear Panel

Indicator LEDs
2.4 GHz Link Rate LED
5 GHz Link Rate LED
Device to Extender LED
Ethernet ports
1–5 LEDs
USB LED
USB 3.0 port
www.netgear.com/support
Nighthawk
AC1900 WiFi Access Point
Model EX7000

Quick Start Guide

Reset button
Ethernet ports 1–5 WPS button
This LED indicates the 2.4 GHz WiFi connection
2.4 GHz Link
between the access point and the router.
Rate LED
Solid green. Best connection
Solid amber. Good connection
Solid red. Poor connection
Off. No connection
5 GHz Link Rate This LED indicates the 5 GHz WiFi connection
LED between the access point and the router.
Solid green. Best connection
Solid amber. Good connection
Solid red. Poor connection
Off. No connection
Device to
Solid green. The access point and device are
Extender LED
connected.
Solid green. The Ethernet port detected an
Ethernet ports
1–5 LEDs Ethernet link with the access point.
Solid green. A USB device is connected to the
USB LEDs
access point.
to register your product, get help, access the latest downloads and
March 2017
Power connector
Power button