Makita DDF483 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Drill
  5. DDF483
  6. Instruction manual
Makita DDF483 Instruction Manual

Makita DDF483 Instruction Manual

Hide thumbs Also See for DDF483:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
INSTRUCTION MANUAL
Cordless Driver Drill
DDF483
DDF083
Read before use.

Advertisement

Table of Contents
loading

Related Manuals for Makita DDF483

Summary of Contents for Makita DDF483

  • Page 1 INSTRUCTION MANUAL Cordless Driver Drill DDF483 DDF083 Read before use.

  • Page 2: Specifications

    SPECIFICATIONS Model: DDF483 DDF083 Drilling capacities Steel 13 mm Wood 36 mm Fastening capacities Wood screw 6 mm x 75 mm Machine screw No load speed High (2) 0 - 1,700 min Low (1) 0 - 500 min Overall length...

  • Page 3: Save All Warnings And Instruc- Tions For Future Reference

    Do not overreach. Keep proper footing and Save all warnings and instruc- balance at all times. tions for future reference. of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or mains-operated (corded) power tool or battery-operated jewellery.

  • Page 4: Tips For Maintaining Maximum Battery Life

    (gained from repeated use) replace strict adherence to safety rules for the subject also void the Makita warranty for the Makita tool and product. MISUSE or failure to follow the safety charger.

  • Page 5: Functional Description

    Charge the battery cartridge if you do not use Indicating the remaining battery it for a long period (more than six months). capacity Only for battery cartridges with the indicator FUNCTIONAL DESCRIPTION CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool.
  • Page 6 Overheat protection Lighting up the front lamp before turning the tool on again. Overdischarge protection When the battery capacity is not enough, the tool stops automatically. In this case, remove the battery from the tool and charge the battery. NOTE: Overheat protection (for battery) will work only with batteries with star marking.
  • Page 7 CAUTION: Always set the speed change lever terclockwise rotation. fully to the correct position. If you operate the When the reversing switch lever is in the neutral posi- tool with the speed change lever positioned halfway tion, the switch trigger cannot be pulled. Speed change damaged.
  • Page 8 For Model DDF483 (optional accessory) 1. Driver bit 2. Sleeve 1. Sleeve 2. Close 3. Open tion of the arrow and insert the bit-piece and driver should be inserted into the sleeve with its pointed counterclockwise.

  • Page 9: Operation

    Installing hook other hand on the bottom of the battery cartridge to control the twisting action. 1. Groove 2. Hook 3. Screw Screwdriving operation the hook, insert it into a groove in the tool housing on CAUTION: Adjust the adjusting ring to the proper torque level for your work.

  • Page 10: Optional Accessories

    CAUTION: CAUTION: These accessories or attachments when the drill bit begins to break through the are recommended for use with your Makita tool workpiece. accessories or attachments might present a risk of CAUTION: A stuck drill bit can be removed for its stated purpose.
  • Page 12 Jan-Baptist Vinkstraat 2, M a k i t a E u r o p e N . V . 3070 Kortenberg, Belgium 3-11-8, Sumiyoshi-cho, M a k i t a C o r p o r a t i o n Anjo, Aichi 446-8502 Japan w w w .

This manual is also suitable for:

Ddf083

Table of Contents