Auto Shut-Off - Omega HHP360 Series User Manual

Auto Shut-Off

Enabling the Auto Shut-Off feature allows the manometer to turn
itself off after a user selected period of keypad inactivity.
Selectable options include DISABLED, 10 Minutes (which is the
factory shipped default), 20 Minutes, 30 Minutes, 45 Minutes and
60 Minutes. Disabling this feature limits the manometer to being
turned off by using the ON/OFF key only.
To configure auto shut-off follow these steps:
Keystroke
1. Follow steps 1-6 in
the User Info Select
table.
2. Press the PRGM key,
then the  or 
arrow keys until the
desired shut-off time
is shown.
3. Press the PRGM key.
4. Press the  arrow
key three (3) times.
Note: The "Auto Shut-Off" timer is suspended during Data
Logging and Leak Test sessions to prevent accidental loss of
information. Auto Shut-Off is re-instated after completion of Data-
Logging or Leak Test sessions.
21 of 36
Display
Top line reads "AUTO SHUT-
OFF" and bottom line reads
"ENTER TO SELECT".
Top line reads "AUTO SHUT-
OFF" and bottom line toggles to
"DISABLED", "10", "20", "30",
"45" and "60" minutes .
Desired Auto Shut-Off time is
selected, top line reads "AUTO
SHUT-OFF" and bottom line
reads "ENTER TO SELECT".
Returns to Measure Mode.