Table of Contents
Advertisement
M20011 REL-0000 (2103)
Stopping the Relief Valve Test
At any time during the test you may
1.
Press the
digits continue to blink to indicate the hold status.
2. Press the
message appears. The test restarts.
OFF
3. Press the ✓
you use these keys.
Differential displays
When you first turn on the Smart Manometer, you see the
screen and the internal sensor information displays first. Press the
Up arrow
and external sensor information displays.
Press the
▪
and external sensors displays. The internal sensor displays in
large characters while external sensor information displays in
small characters.
Press the
▪
(internal measurement units).
Note: Differential displays are not available if either pressure sensor
is a differential sensor.
Press the
▪
units (external measurement units).
▪
Press the
units (internal measurement units).
Press the
▪
▪
Press the
Auto Off (Automatic shut off)
How long will the Smart Manometer remain on if I leave it
unattended?
▪
The default setting is
You can configure the timeout for the Auto Off with HHP400
▪
Suite.
The Auto Off timeout is suspended during
▪
Leak Test sessions
▪
Auto Shut-Off automatically restarts after Data Logging or
Leak Test sessions stop.
User Manual for Smart Manometer
Stop
key and the
HOLD.ON
Zero
key to turn off the hold status and the
to exit the test. The results are lost when
OR X
Up arrow
again and information for both the internal
Up arrow
and Diff P1-P2 scrolls with P1 Units
Left or Right arrow
and Diff P2-P1 scrolls with P2
Left or Right arrow
and Diff P1-P2 scrolls with P1
Down arrow
to reverse the sequence.
Home
key at any point to return to the
Always
On.
to prevent accidental loss of data.
message appears. The
HOLD.
Home
Home
screen.
Data Logging
and
26 of 60
Advertisement
Table of Contents
