Table of Contents
Advertisement
Default settings of the display
5.2 Default settings of the display
The DMS Go+ is equipped with a high-resolution color
display. You can optimize the display according to your
own viewing habits and to the operating environment.
Setting the brightness
DMS Go+
You can set the brightness of the display and select a
value from 1 to 10 for this purpose.
N o t e
A high brightness value increases the power
consumption, due to which the operating
time is reduced in battery operation.
– In the function group CONFIG, select the function
BRIGHTNESS.
– Choose the required value. The display brightness
changes immediately.
N o t e
You can extend the operating time by means
of the power saver function (see Section
Power saving mode, page 5-12).
Edition 4 (05/2014)
5 Operation
5-15
Advertisement
Table of Contents
